High Speed 1L 2L 5L 10L Plastic PP HDPE Bottle Barrel Jerrycan Single Double Station Extrusion Blow Moulding Molding Machine
The extrusion blow molding machine is used to produce all kinds of the hollow plastic containers for foods, toys, beverages, medicines, chemical products, pesticides, detergents etc with material of PE,PP,PVC from 5ml to 20L.
(1)It is suitable for producing PE, HDPE, PP, PVC so on, plastic containers and bottles in all shapes are available, the max. Product volume is up to 30L.
(2)Single station single die head design, very easy to operate and maintenance.
(3)Most components of the blow moulding machine are from famous world brand.
(4)Fully automatic process with low power consumption, high efficiency, quick and safe operation, easy for maintenance.
(5)Accumulation die head, MOOG parison controller equipped.
(6)Bottom blow technology make the product perfect.
(7)Auto lubricant system controlled by PLC.
|Parameters ||Units ||LSN-E70S ||LSN-E80D |
|Material || ||PE,PP,PV,PVC,PA ||PE,PP,PV,PVC,PA |
|Number of die head ||set ||1,2,3,4 ||1,2,3,4 |
|Max Container capacity || ||10L ||10L |
|Screw diameter ||mm ||70 ||80 |
|Screw L/D ratio ||- ||24 ||24 |
|(50HZ)Screw rpm(50hz) ||r/min ||10-70 ||10-60 |
|(PE)Extrusion capacity per hour ||kg/h ||70 ||110 |
|Number of heaters ||- ||3 ||3 |
|Opening stoke ||mm ||600 ||600 |
|Platen size ||mm ||450*520 ||450*520 |
|Clamping stoke ||mm ||200-650 ||200-650 |
|Clamping force ||KN ||110 ||110 |
|Dry cycle time ||s ||9 ||14 |
|Cooling water pressure ||Mpa ||0.2-0.3 ||0.2-0.3 |
|Cooling water consumption ||L/min ||60 ||60 |
|Air pressure ||Mpa ||0.8 ||0.8 |
|Compressed air comsumption ||m3/min ||0.8 ||0.8 |
|Machine dimension(L*W*H) ||mm ||3800*2100*2950 ||4200*3100*3150 |
|Machine net weight ||T ||7 ||10 |
|Extruder heating power ||kw ||14.2 ||16 |
|Power of die heating zone ||kw ||4 ||4 |
|Hydraulic motor ||kw ||11 ||11 |
|Total power ||kw ||55.2 ||65 |