English
 |
| Mold Height(mm): | |
|---|---|
| Screw Speed (rpm): | |
| Screw L/D Ratio: | |
| Material: | |
| Quantity: | |
LFD-950A
LONGSN
Injection molding machine has a large diameter ratio, faster plasticization speed, short drying cycle, and ultra-high plasticizer capacity provide guarantee for the high efficiency of the whole machine.
Features:
1. New conjoined hyperbolic elboe five fulcrum clamping mechanism, after a detailed calculation, manual and software running curve is more stable, smooth process is faster, and longer service life
2. New conjoined template through finite element analysis software, reasonable structure, convenient maintenance, good rigidity, high strength, small deformation
3. Electronic scale attached to cross, speed control is more agile, is conducive to protect the mould
4. Lubrication automatic detection alarm function, can effectively guarantee the lubrication of all nodes in place
5. Compared with the same, we have a bigger bar spacing, molar volume and open mold, processing more plastic products, the high cost performance of the machine
Injection molding machine is used for producing different plastic products PP, PVC PET material, like bottle caps, spoon, bowl, PVC tube, basket, drum, chair... We could offer suitable model injection machine according to customer’s products and requirements.
| INJECTION UNIT LFD-950A | ||||
| SCREW DIAMETER | mm | 30 | 35 | 40 |
| SCREW L/D RATIO | L/D | 24.5 | 21 | 18.4 |
| Theoretical Shot Volume | cm^3 | 113 | 154 | 201 |
| SHOW WEIGHT(PS) | g | 103 | 140 | 183 |
| INJECTION PRESSURE | Mpa | 249 | 183 | 140 |
| THEORETICAL INJECTION RATE(PS) | g/s | 67.5 | 91.8 | 120 |
| PLASTICISING CAPACITY | g/s | 8.3 | 12.5 | 18 |
| SCREW TORQUE | N.m | 510 | ||
| MAX.SCREW ROTATE SPEED | r/min | 260 | ||
| INJECTION STROKE | mm | 160 | ||
| CLAMPING UNIT | ||||
| MAX.CLAMPING FORCE | KN | 950 | ||
| MAX.OPENING STROKER | mm | 340 | ||
| SPACE BETWEEN TIE BARS | mm | 360×360 | ||
| MOULD HEIGHT | mm | 135~380 | ||
| MAX.DAYLIGHT | mm | 720 | ||
| EJECTOR FORCE | kn | 25.4 | ||
| EJECTOR STROKE | mm | 85 | ||
| EJECTOR QUANTITY | pc | 5 | ||
| OTHER | ||||
| PUMP MOTOR POWER | KW | 11 | ||
| PUMP PRESSURE | Mpa | 16 | ||
| HEATING POWER | KW | 7.3 | ||
| HEATING ZONE | 4 | |||
| SIZE | m | 4.25×1.2×1.8 | ||
| NET WEIGHT | t | 3.2 | ||
| OIL TANK CAPACITY | L | 260 | ||
| INTERNATIONAL DESIGNATION | 950-280 | |||
Injection molding machine can produce plastic caps with different shapes,different size.If you have any question,feel free to contact us .
Injection molding machine has a large diameter ratio, faster plasticization speed, short drying cycle, and ultra-high plasticizer capacity provide guarantee for the high efficiency of the whole machine.
Features:
1. New conjoined hyperbolic elboe five fulcrum clamping mechanism, after a detailed calculation, manual and software running curve is more stable, smooth process is faster, and longer service life
2. New conjoined template through finite element analysis software, reasonable structure, convenient maintenance, good rigidity, high strength, small deformation
3. Electronic scale attached to cross, speed control is more agile, is conducive to protect the mould
4. Lubrication automatic detection alarm function, can effectively guarantee the lubrication of all nodes in place
5. Compared with the same, we have a bigger bar spacing, molar volume and open mold, processing more plastic products, the high cost performance of the machine
Injection molding machine is used for producing different plastic products PP, PVC PET material, like bottle caps, spoon, bowl, PVC tube, basket, drum, chair... We could offer suitable model injection machine according to customer’s products and requirements.
| INJECTION UNIT LFD-950A | ||||
| SCREW DIAMETER | mm | 30 | 35 | 40 |
| SCREW L/D RATIO | L/D | 24.5 | 21 | 18.4 |
| Theoretical Shot Volume | cm^3 | 113 | 154 | 201 |
| SHOW WEIGHT(PS) | g | 103 | 140 | 183 |
| INJECTION PRESSURE | Mpa | 249 | 183 | 140 |
| THEORETICAL INJECTION RATE(PS) | g/s | 67.5 | 91.8 | 120 |
| PLASTICISING CAPACITY | g/s | 8.3 | 12.5 | 18 |
| SCREW TORQUE | N.m | 510 | ||
| MAX.SCREW ROTATE SPEED | r/min | 260 | ||
| INJECTION STROKE | mm | 160 | ||
| CLAMPING UNIT | ||||
| MAX.CLAMPING FORCE | KN | 950 | ||
| MAX.OPENING STROKER | mm | 340 | ||
| SPACE BETWEEN TIE BARS | mm | 360×360 | ||
| MOULD HEIGHT | mm | 135~380 | ||
| MAX.DAYLIGHT | mm | 720 | ||
| EJECTOR FORCE | kn | 25.4 | ||
| EJECTOR STROKE | mm | 85 | ||
| EJECTOR QUANTITY | pc | 5 | ||
| OTHER | ||||
| PUMP MOTOR POWER | KW | 11 | ||
| PUMP PRESSURE | Mpa | 16 | ||
| HEATING POWER | KW | 7.3 | ||
| HEATING ZONE | 4 | |||
| SIZE | m | 4.25×1.2×1.8 | ||
| NET WEIGHT | t | 3.2 | ||
| OIL TANK CAPACITY | L | 260 | ||
| INTERNATIONAL DESIGNATION | 950-280 | |||
Injection molding machine can produce plastic caps with different shapes,different size.If you have any question,feel free to contact us .
