English
 |
| Plastic Processed: | |
|---|---|
| Screw Speed (rpm): | |
| Screw L/D Ratio: | |
| Warranty: | |
| Quantity: | |
LFD-950A
LONGSN
Injection molding machine is used for producing different plastic products PP, PVC PET material, like bottle caps, spoon, bowl, PVC tube, basket, drum, chair... We could offer suitable model injection machine according to customer’s products and requirements.
| INJECTION UNIT LFD-950A | ||||
| SCREW DIAMETER | mm | 30 | 35 | 40 |
| SCREW L/D RATIO | L/D | 24.5 | 21 | 18.4 |
| Theoretical Shot Volume | cm^3 | 113 | 154 | 201 |
| SHOW WEIGHT(PS) | g | 103 | 140 | 183 |
| INJECTION PRESSURE | Mpa | 249 | 183 | 140 |
| THEORETICAL INJECTION RATE(PS) | g/s | 67.5 | 91.8 | 120 |
| PLASTICISING CAPACITY | g/s | 8.3 | 12.5 | 18 |
| SCREW TORQUE | N.m | 510 | ||
| MAX.SCREW ROTATE SPEED | r/min | 260 | ||
| INJECTION STROKE | mm | 160 | ||
| CLAMPING UNIT | ||||
| MAX.CLAMPING FORCE | KN | 950 | ||
| MAX.OPENING STROKER | mm | 340 | ||
| SPACE BETWEEN TIE BARS | mm | 360×360 | ||
| MOULD HEIGHT | mm | 135~380 | ||
| MAX.DAYLIGHT | mm | 720 | ||
| EJECTOR FORCE | kn | 25.4 | ||
| EJECTOR STROKE | mm | 85 | ||
| EJECTOR QUANTITY | pc | 5 | ||
| OTHER | ||||
| PUMP MOTOR POWER | KW | 11 | ||
| PUMP PRESSURE | Mpa | 16 | ||
| HEATING POWER | KW | 7.3 | ||
| HEATING ZONE | 4 | |||
| SIZE | m | 4.25×1.2×1.8 | ||
| NET WEIGHT | t | 3.2 | ||
| OIL TANK CAPACITY | L | 260 | ||
| INTERNATIONAL DESIGNATION | 950-280 | |||
Injection molding machine can produce plastic caps with different shapes,different size.If you have any question,feel free to contact us .
Injection molding machine is used for producing different plastic products PP, PVC PET material, like bottle caps, spoon, bowl, PVC tube, basket, drum, chair... We could offer suitable model injection machine according to customer’s products and requirements.
| INJECTION UNIT LFD-950A | ||||
| SCREW DIAMETER | mm | 30 | 35 | 40 |
| SCREW L/D RATIO | L/D | 24.5 | 21 | 18.4 |
| Theoretical Shot Volume | cm^3 | 113 | 154 | 201 |
| SHOW WEIGHT(PS) | g | 103 | 140 | 183 |
| INJECTION PRESSURE | Mpa | 249 | 183 | 140 |
| THEORETICAL INJECTION RATE(PS) | g/s | 67.5 | 91.8 | 120 |
| PLASTICISING CAPACITY | g/s | 8.3 | 12.5 | 18 |
| SCREW TORQUE | N.m | 510 | ||
| MAX.SCREW ROTATE SPEED | r/min | 260 | ||
| INJECTION STROKE | mm | 160 | ||
| CLAMPING UNIT | ||||
| MAX.CLAMPING FORCE | KN | 950 | ||
| MAX.OPENING STROKER | mm | 340 | ||
| SPACE BETWEEN TIE BARS | mm | 360×360 | ||
| MOULD HEIGHT | mm | 135~380 | ||
| MAX.DAYLIGHT | mm | 720 | ||
| EJECTOR FORCE | kn | 25.4 | ||
| EJECTOR STROKE | mm | 85 | ||
| EJECTOR QUANTITY | pc | 5 | ||
| OTHER | ||||
| PUMP MOTOR POWER | KW | 11 | ||
| PUMP PRESSURE | Mpa | 16 | ||
| HEATING POWER | KW | 7.3 | ||
| HEATING ZONE | 4 | |||
| SIZE | m | 4.25×1.2×1.8 | ||
| NET WEIGHT | t | 3.2 | ||
| OIL TANK CAPACITY | L | 260 | ||
| INTERNATIONAL DESIGNATION | 950-280 | |||
Injection molding machine can produce plastic caps with different shapes,different size.If you have any question,feel free to contact us .
